CPLID TV LED Backlight Review: Worth It for 60-65 Inch Sets?

Quick Verdict

The CPLID TV LED backlight is a solid, no-frills ambient lighting option for 60 to 65 inch screens. It installs in under ten minutes, draws power straight from your TV's USB port, and the RF remote works reliably even when you're not in the room. For the price, it delivers — though the adhesive quality and the forgettable flash modes are worth knowing about before you buy.

Rating: 4.3/5

What Is the CPLID TV LED Backlight?

Picture this: it's 10 PM, you're three episodes deep into a series, and the room is pitch black except for your 65-inch screen blazing away. That's the scene I sat in for two nights before unboxing the CPLID kit. The idea behind any TV LED backlight is simple — put a soft color glow behind your screen to reduce the contrast between the bright panel and the dark room, which in theory eases eye fatigue during long viewing sessions.

The CPLID system ships as four pre-cut LED strips, each with adhesive backing, designed to wrap around the perimeter of a 60 to 65 inch television. Unlike cheaper kits that leave the top edge dark, this one covers all four sides. Power comes through a standard USB connection — plug it into your TV's USB-A port and the whole thing switches on and off in sync with your set. No extra power brick, no dangling wall wart.

Key Features

• Covers all 4 sides of 60-65 inch TVs with pre-cut strips
• Powered directly from your TV's USB port — auto on/off with your set
• Wireless RF remote with 60 ft range, 360° control, no line of sight needed
• 17 colors including pure white, plus fade and flash modes
• Encode mode lets one remote control two separate backlight units
• LED strips are slim and black, staying hidden behind the TV bezel

Hands-On Review

Installation took me about eight minutes — slightly faster than the advertised 5-10, though your mileage will vary depending on how much cable management you want to do. I peeled the adhesive backing, stuck each strip along the edges of my 65-inch LG, and routed the USB cable to the side port. The strips are genuinely thin; from a normal seating distance you don't see them at all. What you do see is the light.

Color quality surprised me. The white is clean rather than the slightly blue or yellow tint you sometimes get from budget strips, and the saturated colors — particularly the deeper blues and magentas — look rich against a dark wall. I ran through all 17 colors during a Friday night gaming session and found myself gravitating toward a soft teal for movies and a warm amber for late-night TV. The fade mode is smooth; the flash mode feels like a 2005 rave. You'll use it once for novelty and never again, but having it doesn't hurt.

What I genuinely appreciated was the RF remote. My TV sits inside a media console with a closed door. An infrared remote would be useless here. The CPLID's RF signal punches through the door without issue — I changed colors from the kitchen on Saturday night without missing a scene. The encode function, which lets you pair one remote to multiple units, is a nice touch for anyone running two TVs in the same room.

Will I keep using it? Honestly, yes — but with a caveat. The adhesive held fine in my climate-controlled living room. I've read reports from buyers in humid environments where the strips began peeling after a few weeks. If your room tends toward moisture, consider adding a dab of alternative adhesive at the corners after initial placement.

Who Should Buy It?

This is a good fit if you:

• Watch TV or game in a dark or dimly lit room and want less screen-contrast fatigue
• Have a 60-65 inch TV and want full perimeter coverage without hunting for separate strips
• Prefer not to deal with a separate power adapter — your TV's USB port handles everything
• Need the remote to work through furniture, doors or around corners

Skip this if your TV is smaller than 60 inches (the strips will overhang), if you need app or smart-home integration, or if you want syncing to your on-screen content — this is a static color remote system, not an HDMI-based bias light.

Alternatives Worth Considering

If the CPLID doesn't quite fit your setup, here are two alternatives worth a look:

• Govee TV Backlight — Offers RGBIC technology with segmented color control and app-based effects. A better pick if you want animated, per-segment lighting but expect to pay a bit more.
• Lyxadisk TV Backlight Kit — Comparable USB-powered design with similar RF remote range, often found at a lower price point. Worth checking if you're on a tighter budget and don't need the encode-multiple feature.

FAQ

Final Verdict

The CPLID TV LED backlight isn't trying to be the smartest or most feature-rich kit on the market — and that's fine. What it does, it does reliably: ambient light behind your screen, synced to your TV, controlled from across the room, without cluttering your setup with extra cables. The build quality and color output are well above what the price suggests, and the full 4-side coverage means no awkward dark patches at the top. For anyone running a 60-65 inch set in a home theater or gaming room, this is a straightforward upgrade worth making.